Alcohol Distillation Unit with Chiller
Automated alcohol distillation unit with integrated recirculating chiller (0–15°C), automatic steam addition, and 24x7 LCD interface.
- Adjustable heating system with built-in over-temperature protection
- Automatic steam addition for standardized distillation extraction
- Integrated recirculating chiller maintaining cooling temperatures of 0 – 15 °C
Analytical Balances
High-precision weighing analytical balance up to 220g with internal automatic calibration, anti-static draft shield, and resolutions down to…
- Digital LCD or responsive touch screen display for instant readout
- High-precision electromagnetic force restoration weighing mechanism
- Internal automatic calibration routine to maintain metrological accuracy
COD Digestion Unit
Aluminum block COD digestion unit for 8 or 15 samples in 40mm reaction vessels with digital PID controller…
- High conductivity aluminum heating block accommodating 8 or 15 samples in 40mm reaction vessels
- Digital PID temperature indicator cum controller with built-in process timer up to 250°C
- Insert rack for safe simultaneous handling of digestion tubes and condensers
Deep Freezers
Laboratory upright deep freezer with digital temperature controller for –16°C and –24°C sample storage with lockable doors and…
- Dual setpoint capability for –16°C and –24°C storage
- Upright single-door cabinet with lockable handle and security key
- Low-noise, energy-efficient refrigeration compressors
Digital Autoclave
Digital vertical laboratory autoclave with 3mm heavy stainless steel chamber, swivel wing nut lid locks, and LED temperature/pressure…
- Lid locks against a rubber gasket with heavy-duty swivel wing nut bolts
- Digital LED display for displaying actual and set temperature values
- Dual safety systems: Over-pressure release valve, over-temperature cutoff, and door interlocks
Digital Flame Photometer
Microprocessor digital flame photometer for multi-element analysis (Na, K, Ca, Li, Ba) with built-in low-noise air compressor and…
- Digital display for direct concentration readouts without manual calculations
- Simultaneous or selectable multi-element detection: Sodium (Na), Potassium (K), Calcium (Ca), Lithium (Li), Barium (Ba)
- Integrated internal air compressor engineered with low-noise operation
Digital Laboratory Oven
High-volume thermal convection oven up to 250°C with polished SS inner chamber, glass wool insulation, caster wheels, and…
- Digital PID temperature control for precise heating up to 250°C with ±1°C to ±2°C accuracy
- Double-wall fabrication with highly polished stainless steel inner chamber and glass wool insulation
- Forced air convection produces faster temperature response and minimal fluctuation
Dry Hot Air Oven
Forced air convection dry hot air oven heating up to 300°C with microprocessor PID controller and double-layer glass…
- Double layer glass door with large viewing window for sample observation
- Microprocessor PID controller for accurate thermal stability up to 300°C
- Polished stainless steel inner chamber with rounded corners for quick and easy cleaning
Glass Dryer
21-peg benchtop or wall-hanging laboratory glassware dryer providing rapid thermal drying in 10 to 15 minutes with 650W…
- Versatile mounting: Usable as a benchtop model or wall-mounted in lab washing areas
- Rapid drying of laboratory glassware and articles within 10 to 15 minutes
- 21 Drying Pegs: 16mm (8 Nos), 10mm (8 Nos), and 7mm (5 Nos)
Heating Mantle with Stirrer – Analog
Analog heating mantle with built-in magnetic stirring for round-bottom flasks from 50 ml to 5000 ml, heating up…
- Analog knob controls for heating and variable stirring speed
- Flexible heating element made from resilient glass fiber
- Integrated electronic circuit card for simultaneous heat and magnetic agitation
Heating Mantle with Stirrer – Digital
Digital PID heating mantle with integrated magnetic stirrer, PT100 temperature probe, and LED/LCD readout across 50 ml to…
- Digital temperature and speed control with LED/LCD display for temperature and RPM
- Heating element made from hand-woven glass fiber for uniform heat distribution
- Built-in PID controller achieving temperature accuracy of ±0.5°C
Hot Plate Magnetic Stirrer
Dual-function laboratory hot plate magnetic stirrer offering simultaneous heating up to 380°C and stirring at 1500 RPM with…
- Dual Function: Combines simultaneous magnetic stirring and surface heating
- Stirring speed up to 1500 RPM with smooth start to prevent splashing
- Temperature range from ambient up to 350°C–380°C
Hot Plate Magnetic Stirrer – Digital
Microprocessor-controlled digital hot plate magnetic stirrer with 600W heating, digital display, external temperature probe support, and 5L capacity.
- Digital LCD/LED Display for precise monitoring of temperature and stirring speed
- PID-based temperature control with external probe support
- Adjustable, stable stirring speed up to 1500 RPM for varied viscosities
Incubator
25-liter versatile cooling incubator with digital/analog controller operating from ambient less +15°C to 60°C.
- Versatile cooling incubator delivering stable low-temperature performance
- Digital or analog controller with accurate set point adjustment and real-time temperature display
- Temperature uniformity within ±1.5°C
Infrared Kjeldahl Digestion System
Infrared Kjeldahl digestion system with quartz tubes withstanding 1000°C and boiling sulfuric acid at 420°C for official protein…
- Quartz Digestion Tubes: Can withstand sudden thermal shock up to 1000°C and boiling sulfuric acid at 420°C without breakage
- High-efficiency quartz infrared heaters delivering fast, uniform thermal digestion
- Ceramic insulation minimizes heat transfer to surroundings, optimizing laboratory working environments
Laboratory Autoclave – Vertical
Double-walled vertical autoclave featuring radial locking lid, pedal lifting mechanism, water level indicator, and steam release systems.
- Double-walled heavy gauge stainless steel construction
- Pedal lifting device for convenient and safe lid elevation
- Radial locking lid mechanism for airtight pressure sealing
Laboratory Hot Plate – Rectangular and Digital
Large rectangular digital laboratory hot plate with PID temperature control, programmable timer, and plate sizes up to 60…
- Digital PID Temperature Control: High-precision setting and display for accurate heating
- Rectangular Heating Surface: Large surface area accommodating multiple vessels
- Adjustable temperature and process timer (0–999 minutes or continuous mode)
Laboratory Incubator
Standard laboratory incubator with inner glass observation door, stainless steel chamber, low noise level, and capacities from 27L…
- Safety features: Over-temperature protection, alarm system, and door lock
- Superior insulation for reduced energy consumption and consistent thermal stability
- Inner glass viewing door for observing samples during continuous operation
Magnetic Stirrer
Smooth, variable-speed laboratory magnetic stirrer operating up to 1500 RPM with stainless steel top plate and overheat protection.
- Magnetic field drive for silent and vibration-free liquid mixing
- Adjustable stirring speed up to 1500 RPM
- Chemically resistant stainless steel top plate
Melting Point Apparatus
Compact 3-sample capillary melting point testing apparatus up to 450°C with illuminated background and rapid heating feature.
- Background illumination provides clear, glare-free visualization of sample phase transitions
- Simultaneous 3-sample capillary tube testing capacity
- Integrated precision thermometer support holder
Micro Centrifuge
High-speed 15,000 RPM / 15,596g microcentrifuge with brushless DC motor, quiet operation (
- High speed spinning up to 15,000 RPM with centrifugal force of 15,596 × g
- Low noise operation (< 60 dB) suitable for quiet laboratory workstations
- Over-speed and temperature protection mechanisms to prevent sample denaturation
Micropipettes
High-precision ergonomic laboratory micropipettes with click stops, smooth plunger, and 14 calibrated volume ranges from 1 µL to…
- Lightweight, ergonomic design minimizing pipetting fatigue during extended testing
- Smooth plunger operation ensuring consistent sample aspiration and dispensing
- Easy volume setting with distinct audible and tactile click stops
Muffle Furnace – High Temperature Furnace
High-temperature 1200°C muffle furnace with digital PID controller, LCD/LED interface, and heavy-duty power ratings up to 12.0 KW.
- User-Friendly Interface with LCD/LED digital temperature display
- Lightweight ceramic fiber wool thermal insulation for rapid heating and energy efficiency
- Digital PID temperature controller regulating up to 1200°C (working temp 1150°C)
Multi-Position Heating Mantle
Multi-position heating mantle in 3 or 6 flask configurations with independent position controls, support rods, and temperatures up…
- Available in 3 or 6 position configurations for parallel reaction workflows
- Each position has an independent energy regulator / heat control knob
- Heating element constructed from durable glass fiber for uniform thermal distribution
Oil Baths
High-temperature laboratory oil bath maintaining uniform thermal stability up to 240°C for chemical synthesis and round-bottom flask refluxing.
- Uniform heat distribution with excellent thermal conductivity up to 240°C
- Corrosion-resistant stainless steel inner chamber and insulated outer casing
- Over-temperature protection and thermal cut-off safety system
Orbital Shaker
Brushless DC motor orbital shaker with 3mm orbit diameter, speed range of 200–1200 RPM, and 4-plate capacity.
- Brushless DC (BLDC) motor for quiet, maintenance-free, powerful high-speed operation
- Variable speed control from 200 to 1200 RPM with circular orbital motion
- Integrated pulse mode function for specialized mixing protocols
Orbital Shaker Incubator
215-liter combined orbital shaking incubator operating at 20–250 RPM and Ambient +5°C to 60°C with 580 x 600…
- Combines thermal incubation and smooth orbital shaking in one unified system
- Digital control for temperature, speed, and process time
- Uniform internal temperature distribution throughout the 215L chamber
Portable Autoclave Sterilizer
Compact 12L stainless steel portable autoclave sterilizer with rapid heating, digital display, and adjustable timer for mobile and…
- Simple digital control system for easy monitoring of temperature, pressure, and cycle status
- Heats up quickly to operating temperature with minimal preheating time
- Stainless steel pressure chamber with lightweight portable footprint (10–20 kg)
Real-Time PCR Machine
96-well Real-Time quantitative PCR system with 4-filter fluorescence detection, ±0.25°C accuracy, 1.6°C/sec ramp rate, and 40–50 min run…
- Comprehensive Data Collection: Fluorescence data gathered across all 4 filters for all 96 wells regardless of setup
- Post-Run Flexibility: Plate setup configurations may be modified after the thermal run completes
- High Temperature Accuracy: ±0.25°C of set point measured at 3 minutes after clock start
Rectangular Muffle Furnace
Lightweight muffle furnace with ceramic fiber wool insulation, kanthal wire elements, and digital control up to 1000°C (working…
- Lightweight design insulated with high-efficiency ceramic fiber wool
- Heating elements fabricated from special high-temperature Kanthal wire
- Digital temperature control with maximum temperature of 1000°C (working 950°C)
Refrigerated Centrifuge
Temperature-controlled centrifuge cooling down to –8°C for delicate biological samples (blood, cells, DNA/RNA) with speeds up to 20,000…
- Fast Cooling System: Rapid pre-cooling function and temperature hold during idle
- Temperature control cooling down to –8°C to prevent biological sample degradation
- Digital LCD display with real-time speed, RCF, and temperature readouts
Stereoscopic Binocular Inclined Microscope
Stereoscopic binocular inclined microscope with 20x–75x magnification, adjustable interpupillary distance (50–75 mm), dual WF eyepieces, and 6V-21W illumination.
- Inclined binocular head with interpupillary distance adjustable between 50 and 75 mm
- Two pairs of wide-field (WF) eyepieces: WF 10x and WF 15x
- Paired parafocal objectives: 2x or 3x and 4x or 5x
Thermoreactor
12-position aluminum heating block thermoreactor up to 180°C for Chemical Oxygen Demand (COD) and total nitrogen sample digestion.
- Temperature Control: Real-time display of both set value and present temperature value up to 180°C
- Process Timer: Integrated digital timer with set value and elapsed time tracking (0–999 min)
- Transparent safety lid offering active UV protection and splash prevention
Triple Water Baths
Triple chamber water bath featuring three independently controlled heating tanks for simultaneous incubation at different temperatures.
- Each chamber features independent temperature control for simultaneous multi-temperature operations
- Corrosion-resistant and easy-to-clean design
- Seamless stainless steel tanks minimize contamination risks
Ultrasonic Baths
High-frequency ultrasonic bath delivering intensive microscopic cavitation cleaning, degassing, and temperature-controlled sample processing.
- High-frequency ultrasonic cavitation (28–40 kHz standard; up to 80+ kHz) for microscopic deep cleaning
- Digital or analog control interface with LED/LCD display
- Adjustable timer from 0–99 minutes or continuous mode
Unstirred Water Baths – Digital
Digital unstirred water bath equipped with a high-accuracy PID temperature controller and audible safety cutoff alarms for routine…
- Digital Temperature Control: High-accuracy PID controller
- Easy-to-read LED or LCD digital display
- User-defined temperature set point
UV Sanitization Chamber
95-liter UV-C germicidal decontamination chamber with 6 adjustable shelves, automatic door-safety interlocks, and 254 nm wavelength radiation.
- High-power 25W UV-C lamp operating at 254 nm germicidal wavelength
- Safety door interlock: UV tube automatically turns off when the door is opened
- 6 adjustable shelves for versatile instrument loading
UV-VIS Spectrophotometer
Precision analytical UV-VIS spectrophotometer covering 190–1100 nm with selectable bandwidth (0.5–4.0 nm), 0.3 nm resolution, and USB/PC connectivity.
- Wide wavelength range from 190 nm to 1100 nm covering UV and Visible bands
- Selectable spectral bandwidth: 0.5, 1.0, 1.5, 2.0, and 4.0 nm
- High photometric precision, 1 nm wavelength accuracy, and 0.3 nm spectral resolution
Vacuum Pump
Compact, oil-free diaphragm laboratory vacuum pump providing 17 L/min flow rate, 100 mbar max vacuum, and quiet operation…
- Oil-Free Operation: Completely clean, oil-free design preventing solvent and hydrocarbon contamination
- Quiet Operation: Low noise levels (45 – 60 dB) suitable for desktop filtration
- Compact and lightweight design (4 – 6 kg), clean and maintenance-free
Vortex Mixer
Sturdy heavy-construction vortex mixer with 4mm orbit diameter, non-slip rubber feet, and 2000 RPM speed for tubes up…
- Adjustable speed range up to 2000 RPM with smooth orbital movement
- Heavy-duty construction with non-slip rubber feet ensures stable, reliable bench operation
- Accommodates test tubes and centrifuge tubes up to 30 mm in diameter
Vortexers
High-speed 2800 RPM laboratory vortexer powered by BLDC motor with 6mm orbit, timer (0–999 min), and Touch /…
- High mixing speed up to 2800 RPM with 6 mm orbit diameter
- Dual modes of operation: Touch-activated mode and Continuous run mode
- High efficiency Brushless BLDC motor for prolonged lifespan
Water Distillation Unit
On-demand double stage water distillation unit with quartz heaters and Borosilicate 3.3 glass delivering conductivity < 3 x…
- On-demand double stage automatic distillation unit removing a wide spectrum of impurities
- Boiler and condenser crafted from high-purity Borosilicate 3.3 glass
- High-efficiency quartz immersion heaters with low power consumption (3–7 kW)